Last Updated on September 15, 2023 by admin
Resetting PS4 controller with reset button:
The reset button can be found under your Controller.
Remove the back of the PS4 Controller by unscrewing the necessary bolts with a screwdriver.
a. Press and hold down the reset button for about 3 seconds to reset the device if the device is unresponsive or frozen, and this will solve most issues, like when you see the Blue Light Of Death (BLOD) or Play-station Button Glitch.
b. If holding down the reset button did not work, go inside your Controller and find where it says L1, L2, R1, R2, L3(click), R3(click); click both analog sticks at the same time and hold them down, release the buttons and you should be back at square one.
Put the back of the Controller on and screw it tight using a Phillips or flat-head screwdriver. That’s all, and now you know how to reset ps4 Controller with the reset button.
Advantage of Resetting PS4 Controller:
Resetting can also help if your PS4 Controller Won’t Connect issue relates to either Bluetooth or USB connectivity issues. The Reset Button for PS4 will completely restart your device from scratch without turning off the power which is why it is beneficial when your machine locks up or starts having problems.
How to reset a PS4 controller?
Unless the hardware fault that triggered the red light was fixed by removing and then reinserting the hard disk drive (HDD), performing a complete rebuild of the PS4 software (factory reset) is required before turning on the console again. This process will wipe out all saved data, including games, settings, and account information, essentially restoring your PS4 to factory default settings.
If you plan on giving away or selling your PS4, formatting the drive will leave it in an empty (or as close to open) state with the possibility of attracting unwelcome attention from would-be thieves. On Windows, open iTunes and select your PS4.
Go to “Account details” on the right-hand side of the page
Scroll down until you see “System Activation” and select “System Deactivation.”
Track the guidelines on the monitor
Note: This will completely wipe your console, so don’t forget to back up anything important before carrying out this process.
That’s all from the second method of resetting the PS4 Controller, and now you know how to reset ps4 Controller
Hard reset of PS4 controller:
A Hard Reset is different from a regular restart because no saves or auto-saves occur during this procedure. All unsaved progress will be lost when doing a Hard Reset. This is done by powering down your console completely, unplugging it for about five minutes, then plugging everything back in again, which only takes around 30 seconds or so to complete. You can also do a factory reset on your Controller by doing the following:
1) Hold down the “PS” and “Share” buttons, then plug the USB cable into your PS4 while still holding them.
2) Let go of both buttons once all lights are white to do a factory reset. Some people believe that you need to hold down additional buttons like L3 or R3 as well as those mentioned above, but this is not true for any version of the PlayStation 4 console; only those two buttons will work.”
What should you do If you can nor connect my PS4 controller?
When the original USB cable fails, it is common to try a different one. Alternatively, you can reset the PS4 Controller by pressing the reset button on the back of the Controller, behind the L2 button. Your Controller may not connect to your PS4 if you contact Sony support.
Why is PS4 getting discontinued?
Sony has stopped reporting PS4 sales since making a commitment to manufacturing more units earlier this year. There’s been a PlayStation 4 “kill” by Sony. Despite selling 120 million units, the PS4 could not quite reach that milestone.
There are several ways to fix this problem, all ranging in difficulty and time commitment. One way is to go into safe mode by holding the power button on your console for 7 seconds then releasing it after the beep sounds once. The system will boot into safe mode, allowing you to backup your saved data or start fresh without worrying about losing any of your saves/game data/rewards progress, etc. Another option is trying new batteries; this may sound silly, but some people had luck with spending their money on brand new batteries after they’ve tried everything else, so why not give it a shot, too, right?
Do a hard reset by holding down the power button on your system for about seven seconds until it beeps twice, then turns it back on. when you turn it back on, make sure to plug in your Controller using USB or Bluetooth ps (if using Bluetooth, “press the4 button” + share at the same time) and go through initial setup steps like creating a user et cetera
ANSWER: this means that you are not connected with either USB or Bluetooth. Connect wirelessly if possible to complete the update or use USB if necessary. note: to install updates wirelessly- press ps home+the ps button (middle) at the same time, choose update system software, and the game will download the update; if you want to install updates using USB- plug-in USB, press the home button and follow on-screen prompts
This means your Controller is not synced with your ps4. Try a hard reset by holding down the power button on your ps4 for about seven seconds until it beeps twice, then turning it back on. when you turn it back on, make sure to plug in your Controller using USB or Bluetooth PS(if using Bluetooth) “press the four-button” + share at the same time and go through initial setup steps like creating a user et cetera
Try turning it back on. when you turn it back on, make sure to plug in your Controller using USB or Bluetooth PS(if using Bluetooth) “press the four-button” + share at the same time and go through initial setup steps like creating a user et cetera